What Can Be Cut With A CO2 Laser?

What Can Be Cut With A CO2 Laser?

Are you thinking about buying a laser cutter? There are truly thousands who are looking to buy one of these tools, more so than ever before. For thousands, they really aren’t too sure whether this tool is really for them because they aren’t sure if the laser can only handle cutting certain things. So, what can a CO2 laser cutting machine cut? Read on to find out a little more about what materials the laser can handle today.

Acrylics and Cloth

What you might not be aware of is that it’s very much possible to cut and engrave with a CO2 laser cutter. A lot of people aren’t aware of that so it’s really quite impressive to know such things. You can absolutely engrave lots of things even acrylics and cloth. You wouldn’t have thought these materials would be engraved and cut with a laser cutting machine but they can. You can absolutely create something very special with your laser cutting machine. Acrylics are fantastic and materials that so many are working with today. That’s why more are choosing these materials than ever before.

Fibreglass

Fibreglass is really quite a popular material and it does seem as though there are thousands now using this for a wide variety of everyday goods. The great thing about fibreglass is that you can easily engrave and cut through fibreglass. A laser cutter can easily handle this material and it’s certainly something which more and more are choosing on a daily basis also. You wouldn’t think people would use a lot of fibreglass but it’s far safer than a lot of other materials today.

Rubber and Wood

Cutting rubber and wood is now no longer a problem when it comes to using a CO2 laser cutter. There are lots of things for you to use with these materials and you are going to love them. What is more, wood veneer can be used with the cutting machine to get the right finish. It has never been easier to cut wood and wood veneer and it takes only a few minutes at best.

Engraving and Cutting

The great thing about a laser cutter is that you can easily use the tool to handle a wide variety of things such as cutting and engraving. You wouldn’t have thought you could do more than cut with the laser machines and yet you can. It has never been easier to engrave certain goods with a laser cutter. That is why there are now more and more choosing to use these machines than ever before. It’s great if you like to take on some crafts at home also. Learn more.

Use Your Laser Machine with Ease

Laser machines really have become highly popular over the course of the last few years and it’s simple to see why. When you use a laser machine you can cut with it as well as engrave with it and it’s really a neat little tool to get your hands on also. It has never been easier to use a laser cutting machine. A CO2 laser cutter has become a highly sought after tool.…

Safety tips to teach your kids when using a laser cutter

Safety tips to teach your kids when using a laser cutter

Safety tips are not only for kids, but also for us adults. Here are few tips you can follow to be safe from any hazards a laser cutter can do:

Be Informed

In all cases, it is the responsibility of the operator to understand on what is the most safely use of a certain laser machine before you will turn it on. User manuals must be properly read clearly before using the machinery, with the particular care to be taken in order to understand its safety issues as well as raised concerns. Through knowing your machinery and reading the given manual probably you will really know, for example, eye protection is required for safe operation when using your respective laser cutter. It says that workshops should usually be clear in posting safety signs for people to be always reminded and be aware of safety issues.  Check the laser company out you buy from and where they get their machine from.  Look at ratings and reviews from third party sources.   Check out this laser review of Laguna Tools.  The sell shop tools and laser machines.

When Firing, Never Leave The Laser Unattended.

The most common mistake of new operators is a lack of supervision of the machine while projects are cut. Truth be told, it is said that laser cutters are a more typically fast, bigger projects can last for long hours just to complete. The common tendency of some new operators is that they sometimes leave their machine unattended while the work is still going on. Even the best machines are made with a metal cases (take note that plastic must be avoided), such the sustained given heat to certain laser hitting on the case at the bottom may damage the exterior case.

Be Alert

Accidents can happen when the people become more complacent with their respective jobs. It is important to always think about the safety upon working near on a machinery. Always be aware of the environment near you and your everyday working habits. Employ the best practices everyday through focusing certain safety measures before starting any job. for more detailed information, visit http://news.thomasnet.com/fullstory/optiplex-laser-cutting-system-comes-with-previewg-control-digital-drive-package-40005214

If there is ever any doubt on the safety of a particular material or operation of your machine, contact technical support of your supplier and check before using. Always have a good plan in case of an emergency situation to happen as well as to be alert on any other unexpected form of safety hazards which may happen.

Always Keep A Clean Workshop+

Safety and cleanliness go hand in hand in minimizing any injury risks. People are usually not aware which small particles are the cut materials (like sawdust) in the air that can ignite as well as can cause explosions. At some point, laser cutters may not release any dust particles, allowing the leftover scrap in order to stay within certain catch-bin could also become a hazard. Keeping a neat and also clutter-free area for workshop reduces the risks of have an accidents or other possible serious safety concern.

Never Cut Any Material with an Unknown Properties

Most people associate the laser cutters with that of cutting wood, though others are now becoming aware of great machines like MC-Series for Fiber’s Laser machine, which can cut metal as well. What many people discover when they purchase a laser machine is that they can cut or engrave a huge variety of materials, including ceramic tiles, fabric, paper, stone, cardboard, glass, acrylic materials, and much more.…